Desain pesawat selama beberapa dekade telah semakin ramping. Tetapi sejarah telah menunjukkan desain pesawat telah berkembang dari berbagai model guna meningkatkan kinerja dan menurunkan biaya pembangunan dan operasional.
Berikut beberapa pesawat yang telah menjadi pengubah model pesawat pada dekade mereka masing-masing.
1912 – Deperdussin Monocoque
This racing aircraft built by France’s Aeroplanes Deperdussion, later to become famous as SPAD, pioneered the light, strong and streamlined monocoque fuselage, formed of thin plywood layers over a circular frame. The Monocoque won the Gordon Bennett
1916 – Albatros D.III
The Albatros series of biplane fighters flown by Germany in World War I featured semi-monocoque fuselages, in which load-bearing plywood skin panels were glued to longitudinal longerons and internal bulkheads. As metal replaced wood, the term semi-monocoque gave way to stressed skin, and remains the prevalent aircraft structural configuration.
1919 – Junkers F13
Germany’s Hugo Junkers flew the revolutionary J1—an experimental all-metal, cantilever-wing, stressed-skin monoplane—in 1915. The steel J1 was followed in 1919 by the Duralumin F13 (pictured), the first all-metal transport aircraft. More than 300 were built. Also flown in 1919 was the sole example of the Zeppelin-Stakken E-4/20, the first four-engine, all-metal passenger aircraft.
1929 – Hall XFH
Built in the U.S. by Hall Aluminum and flown in 1929, the XFH naval fighter prototype (pictured) was the first aircraft with a riveted metal fuselage—a watertight aluminum skin over steel tubing. Hall also pioneered flush rivets and butt joints between skin panels in the PH flying boat, which first flew in 1929.
NEXT
1931 – Budd BB-1 Pioneer
U.S. railcar maker Budd built the BB-1 Pioneer experimental flying boat—based on the Italian Savoia-Marchetti S56—from corrosion-resistant stainless steel using newly developed spot welding. Budd tried again in 1943 with the RB-1 Conestoga cargo aircraft (pictured), but steel is heavy, and it did not catch on.
1940 – de Havilland Mosquito
With the wartime scarcity of aluminum, de Havilland built its Mosquito fighter-bomber (pictured) from wood—plywood facings bonded to a balsawood core and formed using molds to produce monocoque structures. This led to the development of metal-to-metal bonding, used in the de Havilland Comet jet airliner and by Fokker in the F27 and F28 airliners.
1952 – Douglas X-3 Stiletto
The first titanium aircraft was the Douglas X-3 Stiletto (pictured) flown in 1952. Designed to cruise at Mach 2, where skin friction required the heat resistance of titanium, the X-3 was underpowered and barely supersonic. Capable of Mach 3.2, Lockheed’s A-12 and SR-71 were also mainly titanium, and the material was to be used for Boeing’s canceled 2707 supersonic transport, designed to cruise at Mach 2.7.
1964 – Mikoyan-Gurevich MiG-25
Russian design bureau Mikoyan-Gurevich used welded nickel steel for the airframe of the Mach 2.8 MiG-25 fighter (pictured), first flown in 1964, because heat-resistant titanium was difficult to work with and hard to weld. The North American XB-70, designed to reach Mach 3.1, but canceled by the time it flew in 1964, used brazed stainless-steel honeycomb panels and titanium.
NEXT
1976 – McDonnell Douglas F-15 Eagle
McDonnell Aircraft began using computers to help lay out designs in 1969, and developed the computer-aided design system used in development of the F-15 fighter (pictured). The F-15A and Grumman F-14A, both flown first in 1974, used boron-fiber composites in the tails. But boron fiber was expensive, and the U.S. moved to carbon-fiber composite for wing skins on the Boeing AV-8B, F/A-18 and Northrop B-2.
1985 – Airbus A310
The first carbon-fiber primary structure in a production commercial aircraft was the vertical stabilizer of the Airbus A310-300, first flown in 1985. It marked the beginning of a progression of increasing composites use in the European manufacturer’s airliners that added the horizontal stabilizer with the A320 in 1987 and A330/A340 in 1994 and the center wing-box and aft fuselage of the A380 in 2005.
2011 – Boeing 787
Use of carbon-fiber composites in commercial aircraft reached a landmark 50% of structure weight with the Boeing 787, first flown in 2011, where the material allowed a more slender, lower-drag wing and higher cabin pressurization and humidity. Aluminum was reduced to 20%, but titanium boosted to 15%. The competing Airbus A350, flown in 2013, is 53% carbon-fiber by structure weight.
2013 – Bombardier C Series
Looking ahead, Bombardier’s all-new C Series narrowbody suggests one balance of materials and manufacturing in aircraft, at least for future single-aisle airliners. The aircraft has a carbon-fiber composite wing, produced using dry-fiber composites and resin transfer infusion, and a metallic fuselage using lightweight aluminum-lithium alloy for damage resistance and repairability.